REAR SEAT ASSEMBLY (for LH Side) DISASSEMBLY


  1. REMOVE REAR CENTER INNER BELT ASSEMBLY LH


    1. Disconnect each connector and disengage each clamp.

    2. A01NLEG

      Remove the nut and rear center seat inner belt assembly.

  2. REMOVE REAR SEAT COVER CAP


    1. A01NMYEE01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver wrapped with protective tape, disengage the 3 claws and remove the rear seat cover cap.

  3. REMOVE NO. 1 RECLINING ADJUSTER RELEASE HANDLE LH


    1. A01NL2C

      Remove the 3 screws and the No. 1 reclining adjuster release handle LH.

  4. REMOVE REAR SEAT CUSHION MOULDING LH


    1. A01NM27

      Remove the 2 screws.

    2. Disengage the 2 guides.

    3. A01NIRK

      Disengage the guide and remove the rear seat cushion moulding LH as shown in the illustration.

  5. REMOVE REAR SEAT CUSHION MOULDING RH


    1. A01NM61

      Remove the 3 screws.

    2. Disengage the 4 claws and remove the rear seat cushion moulding RH.

  6. REMOVE REAR SEAT CUSHION COVER WITH PAD


    1. A01NL5V

      Disengage the 2 elastic bands.

    2. A01NJZG

      Disengage the 2 hooks.

    3. A01NI43

      Remove the 2 hog rings as shown in the illustration.

    4. Disengage each hook.

      A01NMG3
    5. A01NN4I

      Remove the 2 hog rings and remove the rear seat cushion cover with pad as shown in the illustration.

  7. REMOVE SEPARATE TYPE REAR SEAT CUSHION COVER


    1. A01NKG9

      Remove the 11 hog rings and the separate type rear seat cushion cover.

  8. REMOVE REAR SEAT INNER BELT ASSEMBLY LH


    1. Disconnect the connector.

    2. A01NLUB

      Remove the bolt and the rear seat inner belt assembly.

      Tech Tips

      When the bolt is removed, the rear seat inner belt assembly is also removed.

  9. REMOVE TONNEAU COVER HOOK HOLDER


    1. A01NIGE

      Remove the 2 screws.

    2. Engage the 2 guides and remove the 2 tonneau cover hook holders.

  10. REMOVE REAR SEATBACK COVER


    1. A01NIM6

      Disengage the 4 claws and remove the rear seatback cover.

  11. REMOVE REAR SEATBACK BOARD CARPET ASSEMBLY LH


    1. A01NN3J

      Disengage the 2 clips and guide, and remove the rear seatback board carpet assembly LH as shown in the illustration.

  12. REMOVE NO. 1 FOLD SEAT STOPPER BAND ASSEMBLY


    1. A01NMIR

      Remove the bolt.

    2. Disengage the guide and remove the No. 1 fold seat stopper band assembly.

  13. REMOVE REAR SEAT HEADREST SUPPORT LH


    1. A01NMJM

      Disengage the 2 claws and remove the rear seat headrest support LH.

  14. REMOVE REAR SEAT HEADREST SUPPORT RH


    1. A01NMIA

      Disengage the 2 claws and remove the rear seat headrest support RH.

  15. REMOVE REAR SEATBACK COVER WITH PAD


    1. A01NMQHE01
      Text in Illustration
      *1 Fastener

      Disengage 2 fasteners.

    2. A01NJFI

      Remove the 4 hog rings.

    3. Disengage the 5 hooks.

    4. A01NN5S

      Remove the 2 hog rings.

    5. Disengage the 2 hooks.

    6. A01NN15

      Turn back the separate type rear seatback cover to remove the nut, and separate the bracket of the separate type rear seatback cover.

    7. A01NI7V

      Remove the bolt and rear seat belt hook.

    8. Remove the rear seatback cover with pad.

  16. REMOVE SEPARATE TYPE REAR SEATBACK COVER


    1. A01NIDA

      Remove the 12 hog rings and the separate type rear seatback cover.

  17. REMOVE NO. 3 REAR SEAT COVER


    1. A01NJQ8

      Remove the screw.

    2. Remove the No. 3 rear seat cover.

  18. REMOVE NO. 2 REAR SEAT INNER SHIELD COVER


    1. A01NN1A

      Remove the 2 screws.

    2. Disengage the claw and remove the No 2 rear seat inner shield cover.

  19. REMOVE REAR SEAT CUSHION SIDE COVER LH


    1. A01NKEV

      Remove the 2 screws.

    2. Disengage the claw and remove the rear seat cushion side cover LH.

  20. REMOVE REAR SEAT RECLINING INNER COVER LH


    1. A01NKHT

      Remove the screw.

    2. Disengage the 2 guides and remove the rear seat reclining inner cover LH.

  21. REMOVE NO. 2 REAR SEAT RECLINING CONTROL CABLE


    1. Disengage the 6 control cable clamps.

    2. Disengage the 4 rear seat hooks and remove the No. 2 rear seat reclining control cable.

      A01NIMS
    3. A01NIF0

      Disengage the claw and remove the rear seat hook from the No. 2 rear seat reclining control cable.

  22. REMOVE REAR SEAT CUSHION SPRING ASSEMBLY LH


    1. A01NMHR

      Using a T45 "TORX" socket, remove the 4 "TORX" bolts, 4 bushes and the rear seat cushion spring assembly LH.