AIRBAG CUT-OFF SWITCH INSTALLATION


  1. INSTALL AIRBAG CUT-OFF SWITCH CYLINDER SUB-ASSEMBLY


    1. A01NJY3

      Engage the 2 claws to install the airbag cut-off switch cylinder sub-assembly.

    2. Connect the connector.

  2. INSTALL INSTRUMENT PANEL GARNISH RH


    1. A01NKWU

      Engage the 6 clips to install the instrument panel garnish RH.

  3. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. INSTALL REAR DECK FLOOR BOX


    1. A01NIBL

      Install the rear deck floor box with the 3 clips.

  5. PERFORM DIAGNOSTIC SYSTEM CHECK


    1. Perform a diagnostic system check Click here.

  6. INSPECT SRS WARNING LIGHT


    1. Inspect the SRS warning light Click here.