INNER REAR VIEW MIRROR INSPECTION


  1. INSPECT INNER REAR VIEW MIRROR ASSEMBLY (w/ REAR VIEW MONITOR SYSTEM)


    1. Inspect the operation of the electrochromic inner mirror.

      A01NLM5E01
      Text in Illustration
      *1

      Component without harness connected

      (Inner Rear View Mirror Assembly)

      		 *2 Black Colored Tape
      *3 Forward Sensor *4 Bright
      *5 Dark *6 Battery

      1. Connect a positive (+) lead from the battery to terminal 1 and a negative (-) lead to terminal 2.

      2. Press the AUTO switch.

      3. Attach black colored tape to the forward sensor to prevent it from sensing.

      4. Light up the mirror with an electric light, and check that the mirror surface changes from bright to dark.

        Standard
        Mirror surface changes from bright to dark.

      5. Measure the voltage according to the Value(s) in the table below.

        Standard Voltage
        Tester Connection Condition Specified Condition
        4 - 5

        Inner rear view mirror surface

        Bright → Dark

        		 Below 1 V → 1.25 V

        If the result is not as specified, replace the inner rear view mirror assembly.

  2. INSPECT INNER REAR VIEW MIRROR ASSEMBLY (w/o REAR VIEW MONITOR SYSTEM)


    1. Inspect the operation of the electrochromic inner mirror.

      A01NJ3LE01
      Text in Illustration
      *1

      Component without harness connected

      (Inner Rear View Mirror Assembly)

      		 *2 Black Colored Tape
      *3 Forward Sensor *4 Bright
      *5 Dark *6 Battery

      1. Connect a positive (+) lead from the battery to terminal 4 and a negative (-) lead to terminal 1.

      2. Press the AUTO switch.

      3. Attach black colored tape to the forward sensor to prevent it from sensing.

      4. Light up the mirror with an electric light, and check that the mirror surface changes from bright to dark.

        Standard
        Mirror surface changes from bright to dark.

      5. Measure the voltage according to the Value(s) in the table below.

        Standard Voltage
        Tester Connection Condition Specified Condition
        3 - 2

        Inner rear view mirror surface

        Bright → Dark

        		 Below 1 V → 1.25 V

        If the result is not as specified, replace the inner rear view mirror assembly.