Click here

THEFT DETERRENT SYSTEM (w/o Intrusion Sensor) HOW TO PROCEED WITH TROUBLESHOOTING

Click here
Click here Click here
Tip:

  • Use this procedure to troubleshoot the theft deterrent system.

  • *: Use the intelligent tester.


  1. Click here

    VEHICLE BROUGHT TO WORKSHOP


    • NEXT
  2. Click here

    CUSTOMER PROBLEM ANALYSIS


    1. Interview the customer to confirm the trouble (Click here).


      • NEXT
  3. Click here

    SYMPTOM SIMULATION


    • NEXT
  4. Click here

    INSPECT COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*


    1. Use the intelligent tester to check for normal function of the CAN communication system (Click here).

      Table 1. Result
      Result Proceed to
      No code is output A
      Any code is output B

      • B
      • GO TO CAN COMMUNICATION SYSTEM (See pageClick here)
      • A
  5. Click here

    PROBLEM SYMPTOMS TABLE


    1. Refer to Problem Symptoms Table (Click here).

      Table 2. Result
      Result Proceed to
      Fault is not listed in Problem Symptoms Table. A
      Fault is listed in Problem Symptoms Table. B

      • B
      • Go to step 7
      • A
  6. Click here

    PERFORM TROUBLESHOOTING ACCORDING TO MALFUNCTION SYMPTOM*


    1. System Description (Click here)

    2. Terminals of ECU (Click here)

    3. Data List / Active Test (Click here)

  7. Click here

    ADJUST, REPAIR OR REPLACE


    • NEXT
  8. Click here

    CONFIRMATION TEST


    • NEXT
    • END