Click here

ENTRY AND START SYSTEM (for Start Function) CUSTOMIZE PARAMETERS

Click here
Click here Click here
Click here

  1. CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER

    Tip:

    The items in the table below can be customized.

    Note:

    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current setting before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Customize Setting / Entry & Start or Warning.

    5. Select the setting by referring to the table below.

      Table 1. Entry & Start
      Tester Display Default Content Setting
      Ignition Available Area All Function that switches the entry hybrid vehicle control system start detection area Front or All
      Table 2. Warning
      Tester Display Default Content Setting
      Key Low Battery Warning ON Function that warns driver that key battery is weak ON or OFF

  2. CUSTOMIZING FUNCTION WITH MULTI-DISPLAY

    Tip:

    The items in the table below can be customized.

    Note:

    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current setting before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.


    1. Customizing with the multi-display (w/ Navigation System)


      1. Turn the power switch on (IG).

      2. Enter the following menus: MENU / Setup / Vehicle / Vehicle customization / Door lock settings.

      3. Select the setting by referring to the table below.

        Display Default Content Setting Relevant ECU
        Entry and Start System On Function that enables or disables the entry and start system. On or Off Certification ECU (smart key ECU assembly)

    2. Customizing with the multi-display (w/o Navigation System)


      1. Turn the power switch on (IG).

      2. Enter the following menus: MENU / Setup / Vehicle / Vehicle customization / Door lock settings.

      3. Select the setting by referring to the table below.

        Display Default Content Setting Relevant ECU
        Entry and Start System On Function that enables or disables the entry and start system. On or Off Certification ECU (smart key ECU assembly)

  3. CUSTOMIZING FUNCTION WITH COMBINATION METER ASSEMBLY

    Tip:

    • Press and hold the ENTER switch on the steering pad switch assembly when entering an item.

    • Briefly press the ENTER switch on the steering pad switch assembly when selecting an item.


    1. Turn the power switch on (IG).

    2. Press and hold the ENTER switch on the steering pad switch assembly

    3. Select the setting by referring to the table below

      Display Default Content Setting Relevant ECU
      ENTRY AND START SYSTEM ON Function that enables or disables the entry and start system. ON or OFF Certification ECU (smart key ECU assembly)

    4. Press and hold the ENTER switch on the steering pad switch assembly.

    5. The setting completion screen will be displayed.

    6. Return to the item selection screen.

  4. ELECTRICAL KEY CANCEL

    Note:

    Because the key (for card type) does not have a wireless transmitter function, it cannot be used to perform the key cancel operation.

    The electrical key cancel operation disables the following functions:


    • Entry Unlock/Lock

    • Entry Hybrid Vehicle Control System Start

    • Entry Back Door Open

    • Electrical Key Lock-in Prevention

    • Warning

    • Memory Call


    1. The operation procedures are as follows:

      Precondition:

      Power switch off, driver side door closed and unlocked.


      1. Push the unlock switch of the key once.

      2. Open the driver door within 5 seconds.

      3. Push the unlock switch of the key twice within 5 seconds.

      4. Close and open the driver door twice within 30 seconds.

        (Driver door: Close → Open → Close → Open)

      5. Push the unlock switch of the key twice within 5 seconds.

      6. Close and open the driver door within 30 seconds.

        (Driver door: Close → Open)

      7. Close the driver door within 5 seconds.

        When electrical key cancel is activated, the wireless door lock buzzer sounds twice.

        To return to the original condition, perform the procedures again. When the original condition is returned, the wireless door lock buzzer sounds once.