POWER DOOR LOCK CONTROL SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER

    Tech Tips

    The following items can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / Utility / Customize Setting.

    5. Select the setting by referring to the table below.

      Door Lock
      Display Default Content Setting
      Unlock Key Twice*1 ON or OFF Function that unlocks only the driver door when the driver door key cylinder is turned to unlock once, and unlocks all doors when it is turned to unlock twice. For the OFF setting, turning it once unlocks all doors. ON or OFF
      Auto Lock*2 ON Function that locks all doors when the vehicle speed reaches a certain level. ON or OFF
      Auto Lock/Shift*2 OFF Function that locks all doors when the shift lever is moved from P to any position other than P while the engine is running and all doors are closed. ON or OFF
      Auto Unlock/Shift OFF Function that unlocks all doors when the shift lever is moved to P from any position other than P while the power switch is on (IG). ON or OFF
      All Unlock/Open-Close*1 ON or OFF Function that unlocks the other doors when the driver door is opened within approximately 43 seconds after the power switch is turned off. ON or OFF

      • *1: Default setting differs depending on the country.

      • *2: w/ Auto Lock Function

      Illuminated Entry
      Display Default Content Setting
      Lighting Time 15 s Function that changes the lighting time after closing all doors. (It will quickly fade out in case of turning the power switch from off to on (ACC) or on (IG).) 7.5 s, 15 s or 30 s

  2. CUSTOMIZING FUNCTION WITH MULTI-DISPLAY

    Tech Tips

    The items in the table below can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current setting before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.


    1. Customizing with the multi-display (w/ Navigation System)


      1. Turn the power switch on (IG).

      2. Enter the following menus: MENU / Setup / Vehicle / Vehicle customization / Door lock settings.

      3. Select the setting by referring to the table below.

        Display Default Content Setting Relevant ECU
        Unlock on second key turn*1 On or Off Function that unlocks only the driver door when the driver door key cylinder is turned to unlock once, and unlock all doors when it is turned to unlock twice. For the OFF setting, turning it once unlocks all doors. On or Off Main body ECU (Multiplex network body ECU)
        Speed sensitive auto locking*2 On Function that locks all doors when the vehicle speed reaches a certain level. On or Off Main body ECU (Multiplex network body ECU)
        Auto lock by shift from P*2 Off Function that locks all doors when the shift lever is moved from P to any position other than P while the engine is running and all doors are closed. On or Off Main body ECU (Multiplex network body ECU)
        Auto unlock by shift to P On Function that unlocks all doors when the shift lever is moved to P from any position other than P while the power switch is on (IG). On or Off Main body ECU (Multiplex network body ECU)
        Auto unlock by driver door*1 On or Off Function that unlocks the other doors when the driver door is opened within approximately 43 seconds after the power switch is turned off. On or Off Main body ECU (Multiplex network body ECU)

        • *1: Default setting differs depending on the country.

        • *2: w/ Auto Lock Function

    2. Customizing with the multi-display (w/o Navigation System)


      1. Turn the power switch on (IG).

      2. Enter the following menus: MENU / Setup / Vehicle / Vehicle customization / Door lock settings.

      3. Select the setting by referring to the table below.

        Display Default Content Setting Relevant ECU
        Speed sensitive auto locking*2 On Function that locks all doors when the vehicle speed reaches a certain level. On or Off Main body ECU (Multiplex network body ECU)
        Auto lock by shift from P*2 Off Function that locks all doors when the shift lever is moved from P to any position other than P while the engine is running and all doors are closed. On or Off Main body ECU (Multiplex network body ECU)
        Auto unlock by shift to P On Function that unlocks all doors when the shift lever is moved to P from any position other than P while the power switch is on (IG). On or Off Main body ECU (Multiplex network body ECU)
        Auto unlock by driver door*1 On or Off Function that unlocks the other doors when the driver door is opened within approximately 43 seconds after the power switch is turned off. On or Off Main body ECU (Multiplex network body ECU)

        • *1: Default setting differs depending on the country.

        • *2: w/ Auto Lock Function

  3. CUSTOMIZING FUNCTION WITH COMBINATION METER ASSEMBLY

    Tech Tips


    • Press and hold the ENTER switch on the steering pad switch assembly when entering an item.

    • Briefly press the ENTER switch on the steering pad switch assembly when selecting an item.


    1. Turn the power switch on (IG).

    2. Press and hold the ENTER switch on the steering pad switch assembly.

    3. Select the setting by referring to the table below

      Display Default Content Setting Relevant ECU
      SPEED SENSITIVE AUTO. LOCK*2 ON Function that locks all doors when the vehicle speed reaches a certain level. ON or OFF Main body ECU (Multiplex network body ECU)
      SHIFT-LINKED AUTOMATIC LOCK*2 OFF Function that locks all doors when the shift lever is moved from P to any position other than P while the engine is running and all doors are closed. ON or OFF Main body ECU (Multiplex network body ECU)
      SHIFT-LINKED AUTOMATIC UNLOCK ON Function that unlocks all doors when the shift lever is moved to P from any position other than P while the power switch is on (IG). ON or OFF Main body ECU (Multiplex network body ECU)
      DRIVER DOOR-LINKED UNLOCK*1 ON or OFF Function that unlocks the other doors when the driver door is opened within approximately 43 seconds after the power switch is turned off. ON or OFF Main body ECU (Multiplex network body ECU)

      • *1: Default setting differs depending on the country.

      • *2: w/ Auto Lock Function

    4. Press and hold the ENTER switch on the steering pad switch assembly.

    5. The setting completion screen will be displayed.

    6. Return to the item selection screen.