ULTRASONIC SENSOR (for Rear Side) INSTALLATION


  1. INSTALL NO. 1 ULTRASONIC SENSOR RETAINER (for Corner Sensor)


    1. A01NIAAE01
      Text in Illustration
      *A RH Side
      *B LH Side
      *a Keyhole
      *b Snap

      Engage the 2 claws to install the No. 1 ultrasonic sensor retainer to the front bumper assembly.

      Note


      • Do not damage the front bumper with the protrusion when installing the retainer.

      • Securely install the No. 1 ultrasonic sensor retainer so that there are no gaps between the retainer and surface of the front bumper.

      Tech Tips

      When installing the retainer, align the keyhole and snap as shown in the illustration.

  2. INSTALL NO. 1 ULTRASONIC SENSOR (for Corner Sensor)


    1. A01NLSEE01
      Text in Illustration
      *A RH Side
      *B LH Side

      Engage the 2 claws to install the No. 1 ultrasonic sensor to the No. 1 ultrasonic sensor retainer.

      Note

      Push the No. 1 ultrasonic sensor retainer from the outside of the bumper when there is a gap between the retainer and the bumper surface. In this case, do not push on the ultrasonic sensor.

    2. A01NMONE01
      Text in Illustration
      *A RH Side
      *B LH Side

      Connect the connector.

  3. INSTALL NO. 1 ULTRASONIC SENSOR RETAINER (for Back Sensor)


    1. A01NIAAE01
      Text in Illustration
      *A LH Side
      *B RH Side
      *a Keyhole
      *b Snap

      Engage the 2 claws to install the No. 1 ultrasonic sensor retainer to the front bumper assembly.

      Note


      • Do not damage the front bumper with the protrusion when installing the retainer.

      • Securely install the No. 1 ultrasonic sensor retainer so that there are no gaps between the retainer and surface of the front bumper.

      Tech Tips

      When installing the retainer, align the keyhole and snap as shown in the illustration.

  4. INSTALL NO. 1 ULTRASONIC SENSOR (for Back Sensor)


    1. A01NLSEE01
      Text in Illustration
      *A LH Side
      *B RH Side

      Engage the 2 claws to install the No. 1 ultrasonic sensor to the No. 1 ultrasonic sensor retainer.

      Note

      Push the No. 1 ultrasonic sensor retainer from the outside of the bumper when there is a gap between the retainer and the bumper surface. In this case, do not push on the ultrasonic sensor.

    2. A01NMONE01
      Text in Illustration
      *A LH Side
      *B RH Side

      Connect the connector.

  5. INSTALL REAR BUMPER ASSEMBLY

    Click here