RELAY ON-VEHICLE INSPECTION


  1. INSPECT ABS MOTOR RELAY (ABS MTR1, 2)


    1. Remove the ABS MTR1 relay and the ABS MTR2 relay.

    2. A01NIVIE11
      Text in Illustration
      *1 ABS Motor Relay (ABS MTR1, 2 Relay)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 - 5 Voltage is not applied between terminals 1 and 2 10 kΩ or higher
      3 - 5 Voltage is applied between terminals 1 and 2 Below 1 Ω