TIRE PRESSURE WARNING ANTENNA REMOVAL


  1. PRECAUTION

    Note

    After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE ROOF HEADLINING ASSEMBLY

    Click here

  4. REMOVE TIRE PRESSURE WARNING ANTENNA


    1. A01NIC3

      Remove the bolt.

    2. Disengage the 2 hooks to remove the tire pressure warning antenna.

    3. A01NIT9

      Disconnect the connector from the tire pressure warning antenna.