DESCRIPTION
Tire pressure warning valve and transmitter signals are transmitted to the tire pressure warning ECU and receiver in the vehicle as radio waves.
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| C2176/76 | Malfunction in the tire pressure warning ECU and receiver internal circuit | Tire pressure warning ECU and receiver |
INSPECTION PROCEDURE
Note
When replacing the tire pressure warning ECU and receiver, read the transmitter IDs stored in the old ECU using the GTS and write them down before removal.
It is necessary to perform initialization Click here after registration Click here of the transmitter IDs into the tire pressure warning ECU and receiver if the ECU has been replaced.
PROCEDURE
CHECK DTC OUTPUT (C2176/76)
Clear the DTCs Click here.
Turn the power switch off.
Turn the power switch on (IG) and check for DTCs Click here.
| OK |
|---|
| DTC C2176/76 is not output. |
| NG |
|
REPLACE TIRE PRESSURE WARNING ECU AND RECEIVER Click here |
| OK |
|
END