HEIGHT CONTROL OFF SWITCH INSTALLATION


  1. INSTALL HEIGHT CONTROL OFF SWITCH (for LHD)


    1. A01NK36

      Engage the 2 claws to install the height control OFF switch to the No. 1 instrument panel under cover sub-assembly.

  2. INSTALL HEIGHT CONTROL OFF SWITCH (for RHD)


    1. A01NMN4

      Engage the 2 claws to install the height control OFF switch to the No. 1 instrument panel under cover sub-assembly.

  3. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)


    1. Engage each clamp.

    2. Connect each connector.

    3. A01NN6J

      Engage the claw and 2 guides.

    4. Install the No. 1 instrument panel under cover sub- assembly with the 2 screws <D>.

  4. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)


    1. Engage each clamp.

    2. Connect each connector.

    3. A01NJ6F

      Engage the claw and 2 guides.

    4. Install the No. 1 instrument panel under cover sub- assembly with the 2 screws <D>.

  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  6. INSTALL REAR DECK FLOOR BOX


    1. A01NIBL

      Install the rear deck floor box with the 3 clips.

  7. PERFORM INITIALIZATION


    1. Perform initialization Click here.

  8. INSPECT SUSPENSION CONTROL SYSTEM


    1. Inspect the suspension control system Click here.