REAR DRIVE SHAFT ASSEMBLY INSPECTION


  1. INSPECT REAR DRIVE SHAFT ASSEMBLY


    1. A01NM0M

      Check that there is no excessive play in the radial direction of the outboard joint.

    2. Check that the inboard joint slides smoothly in the thrust direction.

    3. Check that there is no excessive play in the radial direction of the inboard joint.

    4. Check the boots for damage.

    5. A01NM8BE01

      Check whether the drive shaft dimension (A) is within the following specification.

      Dimension (A)
      619.6 mm (2.03 ft.)