DRIVING SUPPORT ECU REMOVAL


  1. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


    1. A01NIAE

      Remove the 2 screws <D>.

    2. A01NJMH

      Disengage the claw and 2 guides as shown in the illustration.

    3. Disconnect each connector.

    4. Disengage each clamp and remove the No. 1 instrument panel under cover sub-assembly.

  2. REMOVE DRIVING SUPPORT ECU


    1. A01NN96

      Disconnect the connector.

    2. Disengage the clamp.

    3. A01NKDK

      Remove the nut and the driving support ECU.