OIL COOLER REMOVAL


  1. PRECAUTION (w/ Air Suspension)

    CAUTION:

    Be sure to read Precaution thoroughly before servicing Click here.

  2. REMOVE NO. 1 ENGINE UNDER COVER

  3. DRAIN HYBRID TRANSAXLE FLUID


    1. A01NL4ME01
      Text in Illustration
      *1 Filler Plug

      Using a hexagon socket wrench 10 mm, remove the filler plug and gasket.

    2. A01NJ9WE01
      Text in Illustration
      *1 Drain Plug

      Using a hexagon socket wrench 10 mm, remove the drain plug and gasket.

    3. Using a hexagon socket wrench 10 mm, install the drain plug and a new gasket.

      Torque:
      39 N*m  { 398 kgf*cm, 29 ft.*lbf }

  4. REMOVE FRONT BUMPER ASSEMBLY (for Standard)

    Click here

  5. REMOVE FRONT BUMPER ASSEMBLY (for Sport Package)

    Click here

  6. SEPARATE INVERTER WATER PUMP ASSEMBLY


    1. A01NMJW

      Remove the 3 bolts.

    2. A01NJRK

      Disconnect the connector and clamp, and separate the inverter water pump assembly.

  7. REMOVE FRAME SIDE RAIL PLATE SUB-ASSEMBLY


    1. A01NKUR

      Using a transmission jack, hold the front frame.

      Note

      Be sure to position the transmission jack to properly support the front frame.

    2. Remove the 3 bolts, nut and frame side rail plate sub-assembly.

  8. REMOVE OIL COOLER WITH BRACKET ASSEMBLY


    1. A01NKQO

      Disconnect the 4 clamps and 2 oil cooler hoses from the oil cooler with bracket assembly.

    2. A01NM6X

      Remove the bolt, nut and oil cooler with bracket assembly.

  9. REMOVE AIR DUCT


    1. A01NJHPE01
      Text in Illustration
      *A for Standard
      *B for Sport Package

      Remove the 2 bolts and air duct from the oil cooler with bracket assembly.