CRUISE CONTROL SYSTEM ROAD TEST


  1. PROBLEM SYMPTOM CONFIRMATION


    1. A01NJGDE08
      Text in Illustration
      *1 ON/OFF
      *2 - SET

      Inspect the SET function.


      1. Turn the cruise control main switch on.

      2. Check that the cruise main indicator light illuminates on the combination meter assembly.

      3. Drive at a speed between 40 km/h (25 mph) and 200 km/h (124 mph).

      4. A01NMPSE02
        Text in Illustration
        *1 Cruise Main Indicator Light
        *2 Multi-information Display
        *3 "SET" Indicator

        Push the cruise control main switch to - SET.

      5. Check that "SET" is indicated on the multi-information display.

      6. After releasing the switch, check that the vehicle cruises at the set speed.

    2. A01NNCHE02
      Text in Illustration
      *1 ON/OFF
      *2 - SET
      *3 + RES

      Inspect the + (ACCEL) function.


      1. Turn the cruise control main switch on.

      2. Drive at the required speed (40 km/h (25 mph) or higher).

      3. Push the cruise control main switch to - SET.

      4. Check that vehicle speed increases while the cruise control main switch is pushed to + RES, and that the vehicle cruises at the newly set speed when the switch is released.

      5. Push the cruise control main switch to + RES and then release it immediately. Check that vehicle speed increases by approximately 1.6 km/h (1 mph) (tap-up control).

    3. A01NJGDE08
      Text in Illustration
      *1 ON/OFF
      *2 - SET

      Inspect the - (COAST) function.


      1. Turn the cruise control main switch on.

      2. Drive at a speed between 40 km/h (25 mph) and 200 km/h (124 mph).

      3. Push the cruise control main switch to - SET.

      4. Check that vehicle speed decreases while the cruise control main switch is pushed to - SET, and the vehicle cruises at the newly set speed when the switch is released.

      5. Push the cruise control main switch to - SET, and then release it immediately. Check that vehicle speed decreases by approximately 1.6 km/h (1 mph) (tap-down control).

    4. A01NK5QE01
      Text in Illustration
      *1 ON/OFF
      *2 - SET
      *3 CANCEL

      Inspect the CANCEL function.


      1. Turn the cruise control main switch on.

      2. Drive at a speed between 40 km/h (25 mph) and 200 km/h (124 mph).

      3. Push the cruise control main switch to - SET.

      4. When performing any one of the following, check that the operation of the cruise control system is cancelled, normal driving resumes and "SET" on the multi-information display goes off.


        • Depressing the brake pedal

        • Moving the shift lever from D to N or selecting the 3rd, 2nd, or 1st range with the shift lever in S

        • Turning the cruise control main switch off

        • Pulling the cruise control main switch to CANCEL

    5. A01NNCHE03
      Text in Illustration
      *1 ON/OFF
      *2 - SET
      *3 + RES

      Inspect the RES (RESUME) function.


      1. Turn the cruise control main switch on.

      2. Drive at a speed between 40 km/h (25 mph) and 200 km/h (124 mph).

      3. Push the cruise control main switch to - SET.

      4. Cancel the cruise control system by performing any of the above operations (other than turning the main switch off).

      5. After pushing the cruise control main switch to "+ RES" at a driving speed of more than 40 km/h (25 mph), check that the vehicle resumes the speed set prior to the cancellation and that "SET" is also displayed on the multi-information display.