Click here

DYNAMIC RADAR CRUISE CONTROL SYSTEM, Diagnostic DTC:C1A01

Click here
Click here Click here
DTC Code DTC Name
C1A01 Driving Support ECU
Click here

DESCRIPTION

This DTC indicates the internal abnormalities of the driving support ECU.

DTC No. DTC Detection Condition Trouble Area
C1A01 While power switch is on (IG) and dynamic radar cruise control system is operating, driving support ECU detects an internal malfunction for 1 second Driving support ECU
Click here

INSPECTION PROCEDURE

Click here

PROCEDURE


  1. Click here

    READ OUTPUT DTC


    1. Connect the intelligent tester to the DLC3.

    2. Turn the power switch on (IG).

    3. Clear the DTCs (Click here).

    4. Perform the following to make sure that the DTC detection conditions are met.

      Tip:

      If the detection conditions are not met, the malfunction cannot be detected.


      1. Drive the vehicle at a speed of 40 km/h (25 mph) or more.

      2. Turn the cruise control main switch on.

      3. Push the -SET switch to activate the cruise control.

    5. Enter the following menus: Powertrain / Radar Cruise / DTC.

    6. Read the DTCs.

      Result
      Result Proceed to
      DTC is not output A
      DTC C1A01 is output B

  2. Click here

    USE SIMULATION METHOD TO CHECKClick here

  3. Click here

    REPLACE DRIVING SUPPORT ECUClick here