CANISTER REMOVAL


  1. PRECAUTION

    Note

    After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE FRONT CENTER FLOOR COVER


    1. A01NLCOE01
      Text in Illustration
      *1 Bolt
      *2 Screw

      Remove the 7 bolts and 2 screws.

    2. Disconnect the 3 clips and remove the front center floor cover.

  4. REMOVE CHARCOAL CANISTER ASSEMBLY


    1. A01NL54E01
      Text in Illustration
      *1 Retainer

      Push the retainer shown in the illustration and disconnect the vent line tube.

    2. Disconnect the purge line hose.

    3. Disconnect the air inlet line hose.

    4. Remove the 2 bolts and clip.

    5. A01NLZY

      Disconnect the 3 clamps.

    6. Remove the 2 bolts and charcoal canister assembly.