FUEL PUMP INSTALLATION


  1. INSTALL FUEL SUCTION TUBE ASSEMBLY WITH PUMP AND GAUGE


    1. A01NK3G

      Install a new gasket to the fuel suction tube assembly with pump and gauge.

    2. Install the fuel suction tube assembly with pump and gauge.

    3. A01NJ70

      Install the fuel tank vent tube set plate by aligning it with the cutout on the fuel suction tube assembly with pump and gauge.

    4. Install the fuel tank vent tube set plate with the 8 bolts.

      Torque:
      5.9 N*m  { 60 kgf*cm, 52 in.*lbf }
    5. A01NIXKE02
      Text in Illustration
      *1 Tube Joint Clip
      *2 Fuel Tube Joint
      *3 Nylon Tube
      *4 Collar
      *5 O-ring
      *6 Fuel Suction Plate

      Connect the fuel tank main tube with the tube joint clip and clamp.

      Note


      • Check that there are no scratches or foreign objects on the connecting part.


      • Check that the fuel tube joint is inserted securely.


      • Check that the tube joint clip is on the collar of the fuel tube joint.


      • After installing the tube joint clip, check that the fuel tube joint cannot be pulled off.

    6. A01NLUS

      Connect the fuel tank wire connector.

    7. Connect the vapor pressure sensor connector and clamp.

  2. INSTALL FUEL TANK ASSEMBLY

    Tech Tips

    Click here