REAR CRANKSHAFT OIL SEAL REMOVAL


  1. REMOVE HYBRID VEHICLE TRANSAXLE ASSEMBLY

    Tech Tips

    Click here.

  2. REMOVE TRANSMISSION INPUT DAMPER ASSEMBLY


    1. A01NMXIE01

      Using SST, hold the crankshaft pulley.

      SST
      09213-70011   ( 09213-70020 )
      09330-00021
    2. A01NLZV

      Remove the 6 bolts and transmission input damper assembly from the flywheel sub-assembly.

  3. REMOVE FLYWHEEL SUB-ASSEMBLY


    1. A01NMXIE01

      Using SST, hold the crankshaft pulley.

      SST
      09213-70011   ( 09213-70020 )
      09330-00021
    2. A01NLW7

      Remove the 8 bolts and flywheel sub-assembly.

  4. REMOVE REAR ENGINE OIL SEAL


    1. A01NLKGE04
      Text in Illustration
      *1 Protective Tape
      *2 Cut Position

      Using a knife, cut off the rear engine oil seal lip.

    2. Using a screwdriver with its tip taped, pry out the rear engine oil seal.

      Note

      After the removal, check that the crankshaft is not damaged. If it is damaged, smooth the surface with 400-grit sandpaper.