Click here

FRONT CRANKSHAFT OIL SEAL REMOVAL

Click here
Click here Click here
  1. Click here

    PRECAUTION (w/ Air Suspension)

    Note:

    Be sure to read Precaution thoroughly before servicing (Click here).

  2. Click here

    REMOVE FRONT WHEEL RH

  3. Click here

    REMOVE FRONT FENDER LINER RH

  4. Click here

    REMOVE FRONT FENDER APRON SEAL RH

  5. Click here

    REMOVE V-RIBBED BELT


    1. A01NLZR

      Release the V-ribbed belt tension by turning the V-ribbed belt tensioner counterclockwise, and remove the V-ribbed belt from the V-ribbed belt tensioner.

    2. While turning the V-ribbed belt tensioner counterclockwise, align with its holes, and then insert a 5 mm bi-hexagon wrench into the holes to secure the V-ribbed belt tensioner.

  6. Click here

    REMOVE CRANKSHAFT PULLEY


    1. A01NN4YE02

      Using SST, loosen the crankshaft pulley bolt.

      Table 1. Text in Illustration
      *1 Hold
      *2 Turn
      09213-70011 09213-70020
      09330-00021
    2. A01NKBQE03

      Using SST, remove the crankshaft pulley bolt and crankshaft pulley.

      Table 2. Text in Illustration
      *1 Hold
      *2 Turn
      09950-50013 09951-05010 09952-05010 09953-05020 09954-05021
  7. Click here

    REMOVE CRANKSHAFT TIMING GEAR KEY


    1. A01NKPS

      Remove the pulley set key from the crankshaft.

  8. Click here

    REMOVE TIMING CHAIN CASE OIL SEAL


    1. A01NJCME03

      Using a knife, cut off the timing chain case oil seal lip.

      Table 3. Text in Illustration
      *1 Protective Tape
      *2 Cut Position

    2. Using a screwdriver, pry out the timing chain case oil seal.

      Note:

      After the removal, check the crankshaft for damage. If it is damaged, smooth the surface with 400-grit sandpaper.

      Tip:

      Tape the screwdriver tip before use.