RELAY ON-VEHICLE INSPECTION


  1. INSPECT RELAY


    1. Inspect IGCT MAIN relay


      1. A01NJQO

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        3 - 5 No battery voltage is applied across terminals 1 and 2 10 kΩ or higher
        3 - 5 Battery voltage is applied across terminals 1 and 2 Below 1 Ω

        If the result is not as specified, replace the relay.

    2. Inspect OIL PMP relay


      1. A01NJ36

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        3 - 5 No battery voltage is applied across terminals 1 and 2 10 kΩ or higher
        3 - 5 Battery voltage is applied across terminals 1 and 2 Below 1 Ω

        If the result is not as specified, replace the relay.

    3. Inspect BATT FAN relay


      1. A01NJ36E50

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        3 - 5 No battery voltage is applied across terminals 1 and 2 10 kΩ or higher
        3 - 5 Battery voltage is applied across terminals 1 and 2 Below 1 Ω

        If the result is not as specified, replace the relay.