ACCELERATOR PEDAL SENSOR REMOVAL


  1. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)


    1. A01NIAE

      Remove the 2 screws <D>.

    2. A01NJMH

      Disengage the claw and 2 guides as shown in the illustration.

    3. Disconnect each connector.

    4. Disengage each clamp and remove the No. 1 instrument panel under cover sub-assembly.

  2. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)


    1. A01NL7O

      Remove the 2 screws <D>.

    2. A01NKQB

      Disengage the claw and 2 guides as shown in the illustration.

    3. Disconnect each connector.

    4. Disengage each clamp and remove the No. 1 instrument panel under cover sub-assembly.

  3. REMOVE ACCELERATOR PEDAL ASSEMBLY (for LHD)

    Note


    • Avoid physical shock to the accelerator pedal sensor assembly.

    • Do not disassemble the accelerator pedal sensor assembly.

    • The accelerator pedal sensor assembly does not require lubrication.

    • Do not apply oil or other lubricants to the accelerator pedal sensor assembly. If applied, the accelerator pedal sensor assembly must be replaced.


    1. A01NJ3B

      Disconnect the accelerator pedal assembly connector.

    2. Remove the 2 nuts and accelerator pedal assembly.

  4. REMOVE ACCELERATOR PEDAL ASSEMBLY (for RHD)

    Note


    • Avoid physical shock to the accelerator pedal sensor assembly.

    • Do not disassemble the accelerator pedal sensor assembly.

    • The accelerator pedal sensor assembly does not require lubrication.

    • Do not apply oil or other lubricants to the accelerator pedal sensor assembly. If applied, the accelerator pedal sensor assembly must be replaced.


    1. A01NN6K

      Disconnect the accelerator pedal assembly connector.

    2. Remove the 2 nuts and accelerator pedal assembly.