SERVICE PLUG GRIP INSTALLATION


  1. INSTALL SERVICE PLUG GRIP

    CAUTION:

    Wear insulated gloves.

    Note

    Before connecting the service plug, check that no parts and tools remain and that the high voltage terminals and connectors are connected securely.


    1. A01NLQ6

      Wear insulated gloves and insert the service plug grip in the order shown in the illustration.

    2. Tilt the service plug grip 90° and slide it down until a click sound is heard.

  2. INSTALL BATTERY SERVICE HOLE COVER


    1. A01NLK4

      Engage the 2 clips, 2 guides and install the battery service hole cover.

      Note

      Make sure that the battery service hole cover is installed securely.

  3. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

  4. PERFORM INITIALIZATION

    Some systems need initialization after reconnecting the cable to the negative auxiliary battery terminal Click here.