COMBINATION SWITCH INSTALLATION


  1. INSTALL EV DRIVE MODE SWITCH (PATTERN SELECT SWITCH ASSEMBLY)


    1. Engage the 2 claws to install the EV drive mode switch (pattern select switch assembly).

  2. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY


    1. Engage the clamp.

    2. Connect each connector.

    3. A01NINT

      Engage the 3 claws and 3 clips.

    4. w/o Seat Heater System:


      1. Connect the connector to the console box hole cover.

    5. w/ Seat Heater System:


      1. Connect the connector.

      2. Engage the 6 claws to install the seat heater switch with console box hole cover.

    6. A01NJIY

      Engage the 4 claws and 4 clips to install the upper console panel sub-assembly.

  3. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY


    1. A01NIFY

      Turn the shift lever knob sub-assembly clockwise to install the shift lever knob sub-assembly.