Click here

HYBRID CONTROL SYSTEM, Diagnostic DTC:P3004-133

Click here
Click here Click here
DTC Code DTC Name
P3004-133 Power Cable Malfunction
Click here

DESCRIPTION

The power management control ECU monitors its internal operation, it will set DTCs and perform fail-safe control when it detects the following malfunctions.

DTC No. INF Code DTC Detection Condition Trouble Area
P3004 133 A high-voltage wiring system error signal is detected in the power management control ECU Power management control ECU
Click here

INSPECTION PROCEDURE

Click here

PROCEDURE


  1. Click here

    CHECK DTC OUTPUT (HV)


    1. Connect the intelligent tester to the DLC3.

    2. Turn the power switch on (IG).

    3. Enter the following menus: Powertrain / Hybrid Control / Trouble Codes.

    4. Check if DTCs are output.

      Result
      Result Proceed to
      P3004-133 only is output (for LHD). A
      P3004-133 only is output (for RHD). B
      DTCs other than P3004-133 is output. C

    5. Turn the power switch off.


  2. Click here

    GO TO DTC CHARTClick here

  3. Click here

    REPLACE POWER MANAGEMENT CONTROL ECU (for LHD)Click here

  4. Click here

    REPLACE POWER MANAGEMENT CONTROL ECU (for RHD)Click here