HYBRID CONTROL SYSTEM, Diagnostic DTC:P3000-603

DTC Code DTC Name
P3000-603 HV Battery Malfunction

DESCRIPTION

The power management control ECU monitors its internal operation and detects the following malfunction.

DTC No. INF Code DTC Detection Condition Trouble Area
P3000 603 The power management control ECU detects a HV battery cooling system error signal.

  • Power management control ECU

  • HV battery

INSPECTION PROCEDURE

Note

When disposing of an HV battery, make sure to return it through an authorized collection agent who is capable of handling it safely. If the HV battery is returned via the manufacturer specified route, it will be returned properly and in a safe manner by an authorized collection agent.

PROCEDURE


  1. CHECK DTC OUTPUT (HV)


    1. Connect the intelligent tester to the DLC3.

    2. Turn the power switch on (IG).

    3. Enter the following menus: Powertrain / Hybrid Control / Trouble Codes.

    4. Check if DTCs are output.

      Result
      Result Proceed to
      P3000-603 only is output. A
      DTCs other than P3000-603 are also output. B

    5. Turn the power switch off.


    B

    GO TO DTC CHART Click here

    A

  2. REPLACE POWER MANAGEMENT CONTROL ECU


    1. Replace the power management control ECU Click here for LHD, Click here for RHD).


    NEXT

    REPLACE HV BATTERY Click here