Click here

HEATED OXYGEN SENSOR REMOVAL

Click here
Click here Click here
  1. Click here

    PRECAUTION (w/ Air Suspension)

    Note:

    Be sure to read Precaution thoroughly before servicing (Click here).

  2. Click here

    REMOVE FRONT FLOOR COVER LH


    1. A01NKA6E01

      Remove the clip (A).

      Table 1. Text in Illustration
      *1 Bolt
      *2 Screw

    2. Disconnect the 2 clips (B).

    3. Remove the 2 screws, 4 bolts and front floor cover LH.

  3. Click here

    REMOVE OXYGEN SENSOR


    1. A01NITC

      Disconnect the 2 wire harness clamps and oxygen sensor connector.

    2. A01NMD4

      Disconnect the wire harness clamp.

    3. A01NI93E01

      Using SST, remove the oxygen sensor from the No. 3 front exhaust pipe sub-assembly.

      09224-00010
  4. Click here

    REMOVE NO. 3 FRONT EXHAUST PIPE SUB-ASSEMBLY


    1. A01NLL1

      Remove the 2 bolts and 2 compression springs.

    2. A01NJUJ

      Remove the 2 bolts, 2 nuts and No. 3 front exhaust pipe sub-assembly.

    3. Remove the 3 gaskets from the No. 3 front exhaust pipe sub-assembly.

  5. Click here

    REMOVE FRONT EXHAUST PIPE ASSEMBLY


    1. A01NK7A

      Disconnect the 2 clamps and No. 2 oxygen sensor connector (for Bank 2 Sensor 2).

    2. A01NLY4E01

      Loosen the bolt (A).

    3. Remove the 2 bolts (B), 2 nuts and front exhaust pipe assembly.

    4. Remove the gasket from the front exhaust pipe assembly.

  6. Click here

    REMOVE NO. 2 OXYGEN SENSOR


    1. A01NLJF

      Remove the wire harness clamp bracket.

    2. A01NLANE02

      Using SST, remove the No. 2 oxygen sensor from the front exhaust pipe assembly.

      09224-00010