MASS AIR FLOW METER INSTALLATION


  1. INSTALL MASS AIR FLOW METER


    1. A01NKGD

      Install the mass air flow meter with the 2 screws.

      Note

      Make sure that the O-ring is not cracked or does not jump out of position during installation.

    2. Connect the mass air flow meter connector.

  2. INSTALL OUTER COWL TOP PANEL SUB-ASSEMBLY (for LHD)


    1. A01NK8LE01

      Install the outer cowl top panel sub-assembly with the 4 bolts, 4 nuts*1 and 2 nuts*2.

      Torque:
      Nut*1
      85 N*m  { 867 kgf*cm, 63 ft.*lbf }
      Nut*2
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }
      Bolt
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }
    2. A01NLF6

      Engage the grommet and clamp.

    3. Connect the connector (w/ Windshield Deicer).

  3. INSTALL OUTER COWL TOP PANEL SUB-ASSEMBLY (for RHD)


    1. A01NMSUE01

      Install the outer cowl top panel sub-assembly with the 4 bolts, 4 nuts*1 and 2 nuts*2.

      Torque:
      Nut*1
      85 N*m  { 867 kgf*cm, 63 ft.*lbf }
      Nut*2
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }
      Bolt
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }
    2. A01NJD8

      Engage the grommet.

    3. Connect the connector (w/ Windshield Deicer).

  4. INSTALL FRONT SHOCK ABSORBER CAP (w/ Air Suspension)


    1. A01NN8K

      Install the front shock absorber cap with the 3 nuts.

      Torque:
      14 N*m  { 143 kgf*cm, 10 ft.*lbf }

  5. INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY


    1. Install the windshield wiper motor and link assembly Click here.