PARKING ASSIST MONITOR SYSTEM (w/o Side Monitor System) DTC CHECK / CLEAR


  1. CHECK DTC


    1. Connect the intelligent tester to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / Navigation System / DTC.

    5. Check for DTCs, and then write them down.

    6. Check for DTCs Click here.

      Note

      The multi-media module receiver assembly outputs DTCs for the following system. When DTCs other than those in Diagnostic Trouble Code Chart for the parking assist monitor system (w/o side monitor system) are output, refer to Diagnostic Trouble Code Chart for the relevant system.

      System Proceed to
      Navigation System

      Click here

      Rear Seat Entertainment System*1

      Click here

      G-BOOK System*2

      Click here


      • *1: w/ Rear Seat Entertainment System

      • *2: w/ G-BOOK System

  2. CLEAR DTC


    1. Connect the intelligent tester to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / Navigation System / DTC.

    5. Clear the DTCs.