REAR SEAT ENTERTAINMENT ECU INSTALLATION


  1. INSTALL MULTI-DISPLAY CONTROLLER ASSEMBLY

  2. INSTALL NO. 3 MULTI-DISPLAY CONTROLLER BRACKET


    1. Install the No. 3 multi-display controller bracket with the 2 bolts.

  3. INSTALL NO. 2 MULTI-DISPLAY CONTROLLER BRACKET


    1. Install the No. 2 multi-display controller bracket with the 2 bolts.

  4. INSTALL MULTI-DISPLAY CONTROLLER ASSEMBLY WITH BRACKET


    1. Install the multi-display controller assembly with bracket with the 3 nuts.

  5. INSTALL REAR SEAT ENTERTAINMENT ECU ASSEMBLY


    1. w/o G-BOOK System:


      1. Engage the guide.

      2. Install the rear seat entertainment ECU assembly with the 3 bolts.

      3. Connect the 3 connectors.

    2. w/ G-BOOK System:


      1. Engage the guide.

      2. Install the rear seat entertainment ECU assembly with the 3 bolts.

      3. Connect the 7 connectors.

    3. A01NK9U

      Engage the claw and 3 clamps to install the floor carpet to the original position.

    4. A01NIR7

      Engage the claw and 3 clamps to install the floor carpet to the original position.

  6. INSTALL CONSOLE BOX (for RHD)


    1. A01NM8NE01
      Text in Illustration
      *1 Clamp
      *2 Guide

      Engage the 3 guides as shown in the illustration.

    2. Engage the 2 clamps.

    3. Install the 2 clips.

    4. Install the console box with the 5 screws <D>.

  7. INSTALL CONSOLE BOX (for LHD)


    1. A01NJ3FE01
      Text in Illustration
      *1 Clamp
      *2 Guide

      Engage the 3 guides as shown in the illustration.

    2. Engage the 2 clamps.

    3. Install the 3 clips.

    4. Install the console box with the 5 screws <D>.

  8. INSTALL FRONT CONSOLE BOX COVER


    1. A01NLC6

      Connect the connector.

    2. Engage the 5 guides and 2 clips, and install the front console box cover.

  9. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL


    1. A01NMLC

      Engage the 7 clips to install the lower instrument panel finish panel as shown in the illustration.

  10. INSTALL INSTRUMENT PANEL FINISH PANEL


    1. A01NILC

      Engage the 2 guides, claw and 2 clips to install the instrument panel finish panel as shown in the illustration.

  11. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY


    1. Connect each connector.

    2. Engage the 8 clips and 2 guides.

    3. Install the lower instrument panel finish panel sub-assembly with the 2 screws <D>.

    4. A01NMBT

      Engage the 2 claws to close the cover as shown in the illustration.

  12. INSTALL NO. 1 SWITCH HOLE BASE


    1. Connect each connector.

    2. A01NLSK

      Engage the 4 claws and 2 guides to install the No. 1 switch hole base.

  13. INSTALL INSTRUMENT PANEL GARNISH LH


    1. A01NI52

      Engage the 6 clips to install the instrument panel garnish LH.

  14. INSTALL REAR CONSOLE BOX ASSEMBLY

    Click here

  15. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH


    1. A01NK5N

      Engage the 2 clips to install the cowl side trim sub-assembly LH.

    2. Install the clip.

  16. INSTALL FRONT DOOR SCUFF PLATE LH


    1. w/ Illumination:


      1. Connect the connector.

    2. A01NJ04

      Engage the 4 clips, guide and 7 claws, and install the front door scuff plate LH.

  17. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  18. INSTALL FRONT DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure as for the LH side.