AMPLIFIER ANTENNA INSTALLATION


  1. INSTALL AMPLIFIER ANTENNA ASSEMBLY


    1. Engage the 5 clamps.

    2. Install the amplifier antenna assembly with the 2 bolts.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

    3. Connect the 3 connectors.

  2. INSTALL BACK DOOR TRIM COVER RH


    1. A01NJY9

      Engage the 3 clips to install the back door trim cover RH.

  3. INSTALL BACK DOOR TRIM PANEL ASSEMBLY


    1. A01NN8ME01
      Text in Illustration
      *1 2-piece Type Clip

      Engage the 2 claws and 16 clips to install the back door trim panel assembly.

    2. Install the 2 screws.

  4. INSTALL BACK DOOR SERVICE HOLE COVER RH


    1. A01NI3K

      Engage the 5 claws to install the back door service hole cover RH.

  5. INSTALL BACK DOOR SERVICE HOLE COVER LH


    1. A01NLZM

      Engage the 5 claws to install the back door service hole cover LH.

  6. INSTALL BACK DOOR UPPER TRIM COVER RH


    1. A01NIGH

      Engage the 2 claws to install the back door upper trim cover RH.

  7. INSTALL BACK DOOR UPPER TRIM COVER LH


    1. A01NLU1

      Engage the 2 claws to install the back door upper trim cover LH.

  8. INSTALL NO. 2 ROOM LIGHT ASSEMBLY


    1. Connect the connector.

    2. A01NNF3

      Engage the claw to install the No. 2 room light assembly.

  9. INSTALL BACK DOOR LOCK COVER


    1. A01NLEF

      Engage the 4 claws to install the back door lock cover.

  10. INSTALL DOOR PULL HANDLE WITH SWITCH (w/ Power Back Door)


    1. Connect the connector.

    2. A01NKO5

      Engage the 6 claws to install the door pull handle with switch.

  11. INSTALL BACK DOOR FINISH COVER RH (w/o Power Back Door)


    1. A01NKZ2

      Engage the 6 claws to install the back door finish cover RH.

  12. INSTALL BACK DOOR TRIM BASE (w/ Power Back Door)


    1. A01NL82

      Engage the 4 claws to install the back door trim base.

  13. INSTALL BACK DOOR FINISH COVER LH (w/o Power Back Door)


    1. A01NJWD

      Engage the 6 claws to install the back door finish cover LH.

  14. INSTALL TONNEAU COVER SUB-ASSEMBLY

  15. INSTALL UPPER BACK WINDOW PANEL TRIM


    1. A01NMCGE01
      Text in Illustration
      *1 2-piece Type Clip

      Engage the 7 clips and 6 claws to install the upper back window panel trim.