As a unique feature of the Rear Seat Entertainment (RSE) system, the rear seat occupants can enjoy different audio and visual modes at the same time.
The rear seat occupants can control the audio and visual modes with the television switch and volume assembly, and listen to audio by using wired or wireless headphones.
The multi-display controller sub-assembly receives image and sound signals from the multi-media module receiver assembly and distributes the signals to each television display assembly.
A television display assembly is installed on the back of each front seat.
The rear seat occupants can enjoy watching video by connecting an external device.
MOST communication is used between the multi-media module receiver assembly and the multi-display controller sub-assembly. AVC-LAN communication is used between the multi-display controller sub-assembly and television display assembly.
Occupants in the front seats, rear left seat and rear right seat can enjoy different content at the same time. However, this is possible for the rear left and rear right seats only when a VIDEO is selected for either the left or right seat and another source is selected for the other seat.
FUNCTION OF MAIN COMPONENT
|Television Display Assembly||
|Multi-display Controller Sub-assembly||
|Television Switch and Volume Assembly||Outputs various control signals of the RSE system to the television display assembly in the form of infrared signals.|
|Video (Video Adapter) Terminal||This terminal is for connecting the video player's video and audio output terminals.|
|Multi-media Module Receiver Assembly||Sends video signals to the multi-display controller sub-assembly.|
Refer to Navigation System Click here.
When the navigation system changes to the diagnosis screen, the television display assembly shows the "REAR Check" screen.