STEERING HEATER SWITCH INSTALLATION


  1. INSTALL STEERING HEATER SWITCH


    1. Engage the 2 claws to install the steering heater switch to the lower instrument panel finish panel sub-assembly.

  2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY


    1. Connect each connector.

    2. Engage the 8 clips and 2 guides.

    3. Install the lower instrument panel finish panel sub-assembly with the 2 screws <D>.

    4. A01NMBT

      Engage the 2 claws to close the cover as shown in the illustration.

  3. INSTALL NO. 1 SWITCH HOLE BASE


    1. Connect each connector.

    2. A01NLSK

      Engage the 4 claws and 2 guides to install the No. 1 switch hole base.

  4. INSTALL INSTRUMENT PANEL GARNISH


    1. A01NI52

      Engage the 6 clips to install the instrument panel garnish LH.