Click here

STEERING HEATER SWITCH REMOVAL

Click here
Click here Click here
  1. Click here

    REMOVE INSTRUMENT PANEL GARNISH


    1. A01NJH3

      Using moulding remover B, disengage the 6 clips and remove the instrument panel garnish LH as shown in the illustration.

  2. Click here

    REMOVE NO. 1 SWITCH HOLE BASE


    1. A01NJL9

      Push the No. 1 switch hole base in the direction indicated by the arrow to disengage the 4 claws and 2 guides.

    2. Disconnect each connector and remove the No. 1 switch hole base.

  3. Click here

    REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY


    1. A01NL83

      Disengage the 2 claws and open the cover as shown in the illustration.

    2. A01NLP9

      Remove the 2 screws <D>.

    3. Disengage the 8 clips and 2 guides.

    4. Disconnect each connector and remove the lower instrument panel finish panel sub-assembly.

  4. Click here

    REMOVE STEERING HEATER SWITCH


    1. A01NKN5

      Disengage the 2 claws to remove the steering heater switch from the lower instrument panel finish panel sub-assembly.