Click here

PARKING BRAKE SWITCH (for RHD) INSPECTION

Click here
Click here Click here
  1. Click here

    INSPECT PARKING BRAKE SWITCH ASSEMBLY


    1. A01NI3WE01

      Measure the resistance between the connector terminal and the nut inside the parking brake switch assembly.

      Table 1. Standard Resistance
      Tester Connection Switch Condition Specified Condition
      Terminal - Nut on (When shaft is not pressed) Below 1 Ω
      Terminal - Nut off (When shaft is pressed) 10 kΩ or higher
      Table 2. Text in Illustration
      *1 Terminal
      *2 Nut

      If the value is not as specified, replace the parking brake switch assembly.