PARKING BRAKE ASSEMBLY DISASSEMBLY

Note

When the brake pedal is first depressed after replacing the brake pads or pushing back the disc brake piston, DTC C1341, C1342, C1343 and/or C1344 may be stored. As there is no malfunction, clear the DTC(s).

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The procedure listed below is for the LH side.


  1. PRECAUTION (w/ Air Suspension)

    Note

    Be sure to read Precaution thoroughly before servicing Click here.

  2. REMOVE REAR WHEEL

  3. SEPARATE REAR DISC BRAKE CALIPER ASSEMBLY


    1. A01NLTQ

      Remove the 2 bolts, and separate the rear disc brake caliper assembly.

      Note

      Use wire or an equivalent tool to keep the brake caliper from hanging down by the flexible hose.

  4. REMOVE PARKING BRAKE SHOE ADJUSTING HOLE PLUG

  5. REMOVE REAR DISC


    1. A01NM6FE01
      Text in Illustration
      *1 Matchmark

      Put matchmarks on the rear disc and the axle hub.

    2. A01NM7P

      Release the parking brake and remove the rear disc.

      Tech Tips

      If the disc can not be removed easily, use a screwdriver to turn the shoe adjuster as shown in the illustration in order to contract the parking brake shoes.

  6. REMOVE NO. 1 PARKING BRAKE SHOE RETURN TENSION SPRING


    1. A01NJU7

      Remove the 2 No. 1 parking brake shoe return tension springs.

  7. SEPARATE NO. 1 PARKING BRAKE SHOE ASSEMBLY


    1. A01NN7F

      Remove the No. 1 parking brake shoe hold down spring cup and parking brake shoe hold down spring to separate the No. 1 parking brake shoe assembly from the backing plate.

  8. REMOVE PARKING BRAKE SHOE LEVER STRUT


    1. A01NJJB

      Remove the parking brake shoe lever strut and parking brake shoe strut compression spring.

  9. SEPARATE NO. 2 PARKING BRAKE SHOE ASSEMBLY


    1. A01NL20

      Remove the No. 1 parking brake shoe hold down spring cup and parking brake shoe hold down spring to separate the No. 2 parking brake shoe assembly from the backing plate.

  10. REMOVE PARKING BRAKE SHOE ADJUSTING SCREW SET


    1. A01NLSF

      Remove the parking brake shoe adjusting screw set.

  11. REMOVE NO. 1 PARKING BRAKE SHOE ASSEMBLY


    1. A01NLPK

      Separate the No. 2 parking brake shoe return tension spring to remove the No. 1 parking brake shoe assembly.

  12. REMOVE NO. 2 PARKING BRAKE SHOE RETURN TENSION SPRING


    1. A01NLGD

      Remove the No. 2 parking brake shoe return tension spring from the No. 2 parking brake shoe assembly.

  13. REMOVE NO. 2 PARKING BRAKE SHOE ASSEMBLY WITH PARKING BRAKE SHOE LEVER


    1. A01NKI0

      Using needle-nose pliers, separate the No. 3 parking brake cable assembly from the parking brake shoe lever as shown in the illustration.

      Note

      Be careful not to damage the No. 3 parking brake cable assembly.

  14. REMOVE PARKING BRAKE SHOE LEVER


    1. A01NLDO

      Remove the C-washer, shim and parking brake shoe lever from the No. 2 parking brake shoe assembly as shown in the illustration.

  15. REMOVE PARKING BRAKE SHOE GUIDE PLATE SET BOLT


    1. A01NMGT

      Remove the parking brake shoe guide plate set bolt and parking brake shoe guide plate.

  16. REMOVE PARKING BRAKE SHOE HOLD DOWN SPRING PIN


    1. A01NLOJ

      Remove the parking brake shoe hold down spring pin (for front side).

    2. A01NLZK

      Remove the parking brake shoe hold down spring pin (for rear side).