Click here

FRONT BRAKE FLEXIBLE HOSE REMOVAL

Click here
Click here Click here
Note:

If both the left and right hoses are disconnected at the same time, be sure to place identification marks indicating the position on each side.

Tip:

  • Use the same procedure for the LH side and RH side.

  • The following procedure is for the LH side.

Click here
  1. Click here

    PRECAUTION (w/ Air Suspension)

    Note:

    Be sure to read Precaution thoroughly before servicing (Click here).

  2. Click here

    DISCONNECT BRAKE BOOSTER PUMP CONNECTOR


    1. A01NJCZ

      With the power switch off, disconnect the 2 brake booster pump connectors.

  3. Click here

    REMOVE FRONT WHEEL

  4. Click here

    DRAIN BRAKE FLUID

    Note:

    If brake fluid leaks onto any painted surface, immediately wash it off.

  5. Click here

    REMOVE FRONT FLEXIBLE HOSE


    1. A01NJW1

      Remove the union bolt and gasket, and separate the front flexible hose.

    2. A01NIKQ

      Using a union nut wrench, disconnect the brake line from the front flexible hose.

      Note:

      • Do not bend or damage the brake line.

      • Do not allow any foreign matter such as dirt and dust to enter the brake lines.

    3. A01NJBG

      Remove the clip.

    4. A01NJDD

      Remove the bolt and front flexible hose from the absorber bracket.