DESCRIPTION
The No. 1 ultrasonic sensor (front right sensor) is installed on the front bumper. The ECU detects obstacles based on signals received from the No. 1 ultrasonic sensor (front right sensor). If the No. 1 ultrasonic sensor (front right sensor) has an open circuit or other malfunction, it will not function normally.
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| C1AE4 | A malfunction of the No. 1 ultrasonic sensor (front right sensor). |
|
INSPECTION PROCEDURE
Note
If DTCs are output after repairs, turn the power switch on (IG) and turn the LEXUS parking assist-sensor system on. Then clear the DTCs Click here.
PROCEDURE
CHECK DTC OUTPUT
Check for DTCs Click here.
| Result | ||||||||
|---|---|---|---|---|---|---|---|---|
|
| B |
|
GO TO DTC (C1AEC) Click here |
| C |
|
USE SIMULATION METHOD TO CHECK Click here |
| A |
|
REPLACE NO. 1 ULTRASONIC SENSOR (FRONT RIGHT SENSOR)
Replace the No. 1 ultrasonic sensor (front right sensor) with a known good one Click here.
Tech Tips
All of the sensors are interchangeable. To confirm whether a sensor is functioning normally, switch it with a known good sensor from the other end of the vehicle.
| NEXT |
|
CHECK DTC OUTPUT
Clear the DTCs Click here.
Check for DTCs Click here.
| Result | ||||||
|---|---|---|---|---|---|---|
|
| B |
|
END |
| A |
|
REPLACE CLEARANCE WARNING ECU ASSEMBLY Click here