Click here

LEXUS PARKING ASSIST-SENSOR SYSTEM (w/o Side Monitor System) TERMINALS OF ECU

Click here
Click here Click here
Click here
  1. A01NLRLE10

    CLEARANCE WARNING ECU ASSEMBLY


    1. Disconnect the F52 clearance warning ECU assembly connector.

    2. Measure the voltage and resistance according to value(s) in the table below.

      Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
      F52-15 (IG) - F52-17 (E) W - W-B IG power source signal Power switch off Below 1 V
      Power switch on (IG) 11 to 14 V
      F52-17 (E) - Body ground W-B - Body ground Ground Always Below 1 Ω

    3. Reconnect the F52 clearance warning ECU assembly connector.

    4. Measure the voltage, resistance and check for pulses according to value(s) in the table below.

      Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
      F52-7 (BOR) - F52-17 (E) B - W-B Power source for rear sensor circuit Power switch off Below 1 V
      Power switch on (IG), LEXUS parking assist-sensor system on 7.2 to 8.8 V
      F52-9 (SOF) - F52-17 (E) SB - W-B Front sensor communication signal (Front clearance sonar sensor) Power switch on (IG), LEXUS parking assist-sensor system on, shift lever in R

      Pulse generation

      (See waveform 2)
      F52-10 (BBZ) - F52-17 (E) W - W-B Clearance warning buzzer signal Power switch off Below 1 V
      Power switch on (IG), LEXUS parking assist-sensor system on 11 to 14 V
      F52-11 (EF) - F52-17 (E) Y - W-B Ground for clearance warning buzzer Buzzer sounding

      Pulse generation

      (See waveform 1)
      F52-18 (E2) - F52-17 (E) R - W-B Ground for rear clearance sonar Always Below 1 Ω
      F52-19 (E1) - F52-17 (E) R - W-B Ground for rear clearance sonar Always Below 1 Ω
      F52-21 (BOF) - F52-17 (E) B - W-B Power source for front sensor circuit Power switch off Below 1 V
      Power switch on (IG), LEXUS parking assist-sensor system on 7.2 to 8.8 V
      F52-24 (SOR) - F52-17 (E) G - W-B Rear sensor communication signal (Rear clearance sonar sensor) Power switch on (IG), LEXUS parking assist-sensor system on, shift lever in R

      Pulse generation

      (See waveform 2)

    5. Using an oscilloscope, check waveform 1.


      1. A01NMBME01

        Waveform 1 (Reference)

        Item Content
        Terminal No. (Symbol) F52-11 (EF) - F52-17 (E)
        Tool Setting 2 V/DIV., 500 μsec./DIV.
        Vehicle Condition When sonar detects obstacle (buzzer sounds)

    6. Using an oscilloscope, check waveform 2.


      1. A01NMHSE01

        Waveform 2 (Reference)

        Item Content
        Terminal No. (Symbol)

        • CH: 1 F52-9 (SOF) - F52-17 (E)

        • CH: 2 F52-24 (SOR) - F52-17 (E)
        Tool Setting 5 V/DIV., 1 msec./DIV.
        Condition Power switch on (IG), LEXUS parking assist-sensor system on, shift lever in R