ROOF DRIP SIDE FINISH MOULDING REMOVAL


  1. REMOVE REAR ROOF DRIP SIDE MOULDING COVER (w/o Roof Rack)


    1. A019OPBE01

      Disengage the clip and claw, and remove the rear roof drip side finish moulding joint cover as shown in the illustration.

  2. REMOVE FRONT ROOF DRIP SIDE MOULDING COVER (w/o Roof Rack)

    Tech Tips

    Use the same procedure for the front side and rear side.

  3. REMOVE FRONT ROOF RACK LEG COVER (w/ Roof Rack)


    1. A019JZPE01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the front roof rack leg cover.

    2. Using a moulding remover, disengage the 3 claws.

      A019K7E

      Note

      Be careful not to damage the claws.

    3. Disengage the guide and remove the front roof rack leg cover.

  4. REMOVE REAR ROOF RACK LEG COVER (w/ Roof Rack)


    1. A019MBDE01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the rear roof rack leg cover.

    2. Using a moulding remover, disengage the 3 claws.

      A019P6F

      Note

      Be careful not to damage the claws.

    3. Disengage the guide and remove the rear roof rack leg cover.

  5. REMOVE ROOF RACK ASSEMBLY (w/ Roof Rack)


    1. Remove the 4 bolts and roof rack assembly.

      A019KRG

  6. REMOVE ROOF CARRIER SEAL (w/ Roof Rack)


    1. A019O3M

      Remove the roof carrier seal.

      Tech Tips

      Use the same procedure for the front side and rear side.

  7. REMOVE ROOF DRIP SIDE FINISH MOULDING (except Glass Roof)


    1. A019K1A

      Disengage the clip and remove the roof drip side finish moulding.

      Note


      • Do not remove the clip.

      • If the clip is damaged or falls out, replace it with a new one.

  8. REMOVE CENTER ROOF DRIP SIDE FINISH MOULDING (except Glass Roof)


    1. A019LDY

      Disengage the clip and remove the center roof drip side finish moulding.

      Note


      • Do not remove the clip.

      • If the clip is damaged or falls out, replace it with a new one.

  9. REMOVE REAR ROOF DRIP SIDE FINISH MOULDING


    1. A019KY3

      Using a moulding remover, disengage the clip and remove the rear roof drip side finish moulding.

      Note


      • Do not remove the clip.

      • If the clip is damaged or falls out, replace it with a new one.

  10. REMOVE ROOF DRIP SIDE FINISH MOULDING (for Glass Roof)


    1. A019OJK

      Using a moulding remover, disengage the clips and remove the roof drip side finish moulding.

      Note


      • Do not remove the clip.

      • If the clip is damaged or falls out, replace it with a new one.

  11. REMOVE REAR ROOF RACK BRACKET (w/o Roof Rack)


    1. A019PIK

      Remove the 2 bolts and rear roof rack bracket.

  12. REMOVE FRONT ROOF RACK BRACKET (w/o Roof Rack)

    Tech Tips

    Use the same procedure for the front side and rear side.