FRONT BUMPER (for Standard) INSTALLATION


  1. INSTALL FRONT BUMPER ASSEMBLY


    1. Connect each connector.

    2. Connect the headlight cleaner hose. (w/ Headlight Cleaner System)

    3. A019K1C

      Engage the claw to install the front bumper assembly.

    4. A019N2V

      Engage the 2 claws.

    5. A019MI2

      Engage the 3 claws.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    6. Install the 5 clips.

    7. Install the 2 bolts and 2 screws.

      Torque:
      7.5 N*m  { 77 kgf*cm, 66 in.*lbf }

    8. Install the front bumper seal bracket.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    9. Install the screw.

      Torque:
      7.5 N*m  { 77 kgf*cm, 66 in.*lbf }

      Tech Tips

      Use the same procedure for the RH side and LH side.

    10. A019N04E01
      Text in Illustration
      *a Correct
      *b Incorrect

      Install the 2 pin hold clips.

      Note

      Insert the pin hold clip with the slot aligned vertically. Do not rotate the clip after inserting it. After installation, confirm that the slot is aligned vertically.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  2. INSTALL HOOD CENTER CUSHION


    1. Install the 2 hood center cushions.

  3. INSTALL COOL AIR INTAKE DUCT SEAL


    1. Install the cool air intake duct seal with the 6 clips.

  4. INSTALL ENGINE ROOM SIDE COVER LH


    1. Engage the guide.

    2. Install the engine room side cover LH with the 4 clips.

  5. INSTALL ENGINE ROOM SIDE COVER


    1. Engage the guide.

    2. Install the engine room side cover with the 4 clips.

  6. ADD WASHER FLUID (w/ Headlight Cleaner System)


    1. Add washer fluid to the washer jar.

  7. ADJUST FOG LIGHT AIMING

    Click here