FRONT BUMPER (for Standard) REASSEMBLY


  1. INSTALL FRONT BUMPER SIDE RETAINER LH


    1. A019KPC

      Engage the 2 claws to install the front bumper side retainer LH.

    2. Install the bolt.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }
    3. A019N5F

      Engage the clip as shown in the illustration.

  2. INSTALL FRONT BUMPER SIDE RETAINER RH

    Tech Tips

    Use the same procedure as for the LH side.

  3. INSTALL FRONT BUMPER REINFORCEMENT


    1. A019LJO

      Install the front bumper reinforcement with the 6 bolts.

      Torque:
      35 N*m  { 357 kgf*cm, 26 ft.*lbf }

    2. Engage the 3 clamps.

  4. INSTALL FRONT BUMPER ENERGY ABSORBER LH


    1. A019NB3

      Engage the guide to install the front bumper energy absorber LH.

  5. INSTALL FRONT BUMPER ENERGY ABSORBER RH

    Tech Tips

    Use the same procedure as for the LH side.

  6. INSTALL FRONT BUMPER ENERGY ABSORBER


    1. A019MW1

      Engage the 2 guides to install the front bumper energy absorber.

  7. INSTALL LOWER NO. 2 RADIATOR GRILLE


    1. A019O9X

      Engage the 16 claws to install the lower No. 2 radiator grille.

  8. INSTALL LOWER NO. 1 RADIATOR GRILLE


    1. A019P00

      Engage the 14 claws and 2 guides to install the lower No. 1 radiator grille.

  9. INSTALL FRONT BUMPER GARNISH LH


    1. A019O8K

      Engage the 3 claws to install the front bumper garnish LH.

    2. Install the screw and 3 front bumper side retainers.

  10. INSTALL FRONT BUMPER GARNISH RH

    Tech Tips

    Use the same procedure as for the LH side.

  11. INSTALL FOG LIGHT COVER LH


    1. A019OY2

      Engage the 3 claws to install the fog light cover LH.

  12. INSTALL FOG LIGHT COVER RH

    Tech Tips

    Use the same procedure as for the LH side.

  13. INSTALL FOG LIGHT MOUNTING BRACKET LH


    1. A019KPJ

      Engage the guide.

    2. Install the fog light mounting bracket LH with the 3 screws.

  14. INSTALL FOG LIGHT MOUNTING BRACKET RH

    Tech Tips

    Use the same procedure as for the LH side.

  15. INSTALL RADIATOR GRILLE ASSEMBLY


    1. Engage the 10 claws.

    2. Install the radiator grille assembly with the 6 screws.

    3. w/ LEXUS Parking Assist-sensor System:


      1. Engage the 2 clamps to connect the sensor wire.

    4. w/ Headlight Cleaner System:


      1. Engage the 2 clamps to connect the headlight cleaner hose.

  16. INSTALL FRONT BUMPER HOLE COVER LH


    1. A019P09

      Engage the 2 claws to install the front bumper hole cover LH to the center radiator grille moulding LH.

    2. A019P9SE01
      Text in Illustration
      *1 Hook

      Engage the hook.

    3. Engage the 5 claws to install the front bumper hole cover LH with the center radiator grille moulding LH.

  17. INSTALL FRONT BUMPER HOLE COVER RH

    Tech Tips

    Use the same procedure as for the LH side.

  18. INSTALL FRONT FENDER LINER RETAINER


    1. A019N4X

      Engage the claws to install the 2 front fender liner retainers.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  19. INSTALL FRONT BUMPER EXTENSION MOUNTING BRACKET (for Short Type)


    1. A019MUJ

      Engage the 4 claws.

    2. Install the front bumper extension mounting bracket with the 2 screws.

      Torque:
      7.5 N*m  { 77 kgf*cm, 66 in.*lbf }

  20. INSTALL FRONT BUMPER EXTENSION MOUNTING BRACKET (for Long Type)


    1. A019M4V

      Engage the 2 claws.

    2. Install the front bumper extension mounting bracket with the 2 screws.

      Torque:
      7.5 N*m  { 77 kgf*cm, 66 in.*lbf }

  21. INSTALL FOG LIGHT ASSEMBLY LH

    for Halogen Fog Light: Click here

    for LED Fog Light: Click here

  22. INSTALL FOG LIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  23. INSTALL SENSOR WIRE (w/ LEXUS Parking Assist-sensor System)


    1. Engage the 9 clamps to install the sensor wire.

      A019LYI

  24. INSTALL NO. 1 ULTRASONIC SENSOR RETAINER (w/ LEXUS Parking Assist-sensor System)


    1. A019JW6E01
      Text in Illustration
      *A RH Side
      *B LH Side
      *a Keyhole
      *b Snap

      Engage the 2 claws to install the No. 1 ultrasonic sensor retainer to the front bumper assembly.

      Note


      • Do not damage the front bumper with the protrusion when installing the retainer.

      • Securely install the No. 1 ultrasonic sensor retainer so that there are no gaps between the retainer and surface of the front bumper.

      Tech Tips

      When installing the retainer, align the keyhole and snap as shown in the illustration.

  25. INSTALL NO. 1 ULTRASONIC SENSOR (w/ LEXUS Parking Assist-sensor System)


    1. A019L22E01
      Text in Illustration
      *A RH Side
      *B LH Side

      Engage the 2 claws to install the No. 1 ultrasonic sensor to the No. 1 ultrasonic sensor retainer.

      Note

      Push the No. 1 ultrasonic sensor retainer from the outside of the bumper when there is a gap between the retainer and the bumper surface. In this case, do not push on the ultrasonic sensor.

    2. for Front Sensor:


      1. A019KD3E01
        Text in Illustration
        *A RH Side
        *B LH Side

        Engage the 4 claws to install the ultrasonic sensor clip.

      2. A019KKIE01
        Text in Illustration
        *A RH Side
        *B LH Side

        Engage the clamp.

      3. Connect the connector.

    3. for Corner Sensor:


      1. A019O6OE01
        Text in Illustration
        *A RH Side
        *B LH Side

        Connect the connector.

  26. INSTALL HEADLIGHT CLEANER HOSE (w/ Headlight Cleaner System)


    1. Engage the 5 clamps to install the headlight cleaner hose.

      A019LBZ

  27. INSTALL HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY LH (w/ Headlight Cleaner System)


    1. Engage the guide.

      A019MNXE02

    2. While pushing the tab shown by arrow (a), engage the claw as shown in the illustration.

    3. A019P52E02
      Text in Illustration
      *1 Headlight Cleaner Actuator Clamp

      Push up the headlight cleaner actuator clamp.

    4. A019N7AE02
      Text in Illustration
      *1 Headlight Cleaner Clamp
      *2 Headlight Cleaner Hose

      Install the headlight cleaner clamp.

    5. Connect the headlight cleaner hose.

  28. INSTALL HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY RH (w/ Headlight Cleaner System)

    Tech Tips

    Use the same procedure as for the LH side.

  29. INSTALL HEADLIGHT WASHER NOZZLE SUB-ASSEMBLY LH (w/ Headlight Cleaner System)


    1. A019P5J

      Engage the 2 claws to install the headlight washer nozzle sub-assembly LH.

  30. INSTALL HEADLIGHT WASHER NOZZLE SUB-ASSEMBLY RH (w/ Headlight Cleaner System)

    Tech Tips

    Use the same procedure as for the LH side.