FRONT BUMPER (for Sport Package) REASSEMBLY


  1. INSTALL FRONT BUMPER SIDE RETAINER LH


    1. A019KPC

      Engage the 2 claws to install the front bumper side retainer LH.

    2. Install the bolt.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }
    3. A019N5F

      Engage the clip as shown in the illustration.

  2. INSTALL FRONT BUMPER SIDE RETAINER RH

    Tech Tips

    Use the same procedure as for the LH side.

  3. INSTALL FRONT BUMPER REINFORCEMENT


    1. A019LJO

      Install the front bumper reinforcement with the 6 bolts.

      Torque:
      35 N*m  { 357 kgf*cm, 26 ft.*lbf }

    2. Engage the 3 clamps.

  4. INSTALL LOWER AIR DUCT


    1. A019KZ7

      Disengage the 2 guides.

    2. Install the lower air duct with the 2 bolts and 3 clips.

      Torque:
      7.5 N*m  { 77 kgf*cm, 66 in.*lbf }

  5. INSTALL FRONT BUMPER ENERGY ABSORBER LH (for Separate Type)


    1. A019K71

      Engage the guide to install the front bumper energy absorber LH.

  6. INSTALL FRONT BUMPER ENERGY ABSORBER RH (for Separate Type)

    Tech Tips

    Use the same procedure as for the LH side.

  7. INSTALL FRONT BUMPER ENERGY ABSORBER (for Separate Type)


    1. A019MXI

      Engage the 2 guides to install the front bumper energy absorber.

  8. INSTALL FRONT BUMPER ENERGY ABSORBER (except Separate Type)


    1. A019MW6

      Engage the 2 guides to install the front bumper energy absorber.

  9. INSTALL LOWER NO. 1 RADIATOR GRILLE (w/ Front Fender Name Plate)


    1. Engage the 11 claws to install the lower No. 1 radiator grille.

      A019KV5

    2. Install the 2 front bumper side retainers.

  10. INSTALL LOWER NO. 1 RADIATOR GRILLE (w/o Front Fender Name Plate)


    1. Engage the 11 claws to install the lower No. 1 radiator grille.

      A019LFG

    2. Install the 2 front bumper side retainers.

  11. INSTALL FRONT BUMPER GUARD


    1. Engage the 10 claws to install the front bumper guard.

      A019NJ7
    2. A019OBJ

      Install the 7 front bumper side retainers.

    3. A019K4F

      Install the 2 screws and 2 front bumper side retainers.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  12. INSTALL FOG LIGHT COVER LH


    1. A019OAZ

      Engage the 3 claws to install the fog light cover LH to the fog light mounting bracket LH.

    2. A019LIZ

      Engage the 3 claws to install the fog light cover LH with the fog light mounting bracket LH.

    3. Install the 2 screws.

  13. INSTALL FOG LIGHT COVER RH

    Tech Tips

    Use the same procedure as for the LH side.

  14. INSTALL RADIATOR GRILLE ASSEMBLY


    1. Engage the 10 claws.

    2. Install the radiator grille assembly with the 6 screws.

    3. w/ LEXUS Parking Assist-sensor System:


      1. Engage the 2 clamps to connect the sensor wire.

    4. w/ Headlight Cleaner System:


      1. Engage the 2 clamps to connect the headlight cleaner hose.

  15. INSTALL FRONT BUMPER HOLE COVER LH


    1. A019MD3

      Engage the 2 claws to install the front bumper hole cover LH to the center radiator grille moulding LH.

    2. A019KMG

      Engage the guide.

    3. A019OIJE01
      Text in Illustration
      *1 Hook

      Engage the hook.

    4. Engage the 4 claws to install the front bumper hole cover LH with the center radiator grille moulding LH.

  16. INSTALL FRONT BUMPER HOLE COVER RH

    Tech Tips

    Use the same procedure as for the LH side.

  17. INSTALL FRONT FENDER LINER RETAINER


    1. A019LDG

      Engage the claws to install the 2 front fender liner retainers.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  18. INSTALL FRONT BUMPER EXTENSION MOUNTING BRACKET (for Short Type)


    1. A019K0Z

      Disengage the 2 claws.

    2. Install the front bumper extension mounting bracket with the 2 screws.

      Torque:
      7.5 N*m  { 77 kgf*cm, 66 in.*lbf }

  19. INSTALL FRONT BUMPER EXTENSION MOUNTING BRACKET (for Long Type)


    1. A019P6D

      Disengage the 2 claws.

    2. Install the front bumper extension mounting bracket with the 2 screws.

      Torque:
      7.5 N*m  { 77 kgf*cm, 66 in.*lbf }

  20. INSTALL FOG LIGHT ASSEMBLY LH


    1. Engage the 2 guides to temporarily install the fog light assembly.

    2. Install the fog light assembly with the screw.

  21. INSTALL FOG LIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  22. INSTALL SENSOR WIRE (w/ LEXUS Parking Assist-sensor System)


    1. Engage the 9 clamps to install the sensor wire.

      A019LX3

  23. INSTALL NO. 1 ULTRASONIC SENSOR RETAINER (w/ LEXUS Parking Assist-sensor System)


    1. A019JW6E01
      Text in Illustration
      *A RH Side
      *B LH Side
      *a Keyhole
      *b Snap

      Engage the 2 claws to install the No. 1 ultrasonic sensor retainer to the front bumper assembly.

      Note


      • Do not damage the front bumper with the protrusion when installing the retainer.

      • Securely install the No. 1 ultrasonic sensor retainer so that there are no gaps between the retainer and surface of the front bumper.

      Tech Tips

      When installing the retainer, align the keyhole and snap as shown in the illustration.

  24. INSTALL NO. 1 ULTRASONIC SENSOR (w/ LEXUS Parking Assist-sensor System)


    1. A019L22E01
      Text in Illustration
      *A RH Side
      *B LH Side

      Engage the 2 claws to install the No. 1 ultrasonic sensor to the No. 1 ultrasonic sensor retainer.

      Note

      Push the No. 1 ultrasonic sensor retainer from the outside of the bumper when there is a gap between the retainer and the bumper surface. In this case, do not push on the ultrasonic sensor.

    2. for Front Sensor:


      1. A019KD3E01
        Text in Illustration
        *A RH Side
        *B LH Side

        Engage the 4 claws to install the ultrasonic sensor clip.

      2. A019KKIE01
        Text in Illustration
        *A RH Side
        *B LH Side

        Engage the clamp.

      3. Connect the connector.

    3. for Corner Sensor:


      1. A019O6OE01
        Text in Illustration
        *A RH Side
        *B LH Side

        Connect the connector.

  25. INSTALL HEADLIGHT CLEANER HOSE (w/ Headlight Cleaner System)


    1. Engage the 5 clamps to install the headlight cleaner hose.

      A019LWM

  26. INSTALL HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY LH (w/ Headlight Cleaner System)


    1. Engage the guide.

      A019MNXE02

    2. While pushing the tab shown by arrow (a), engage the claw as shown in the illustration.

    3. A019P52E02
      Text in Illustration
      *1 Headlight Cleaner Actuator Clamp

      Push up the headlight cleaner actuator clamp.

    4. A019N7AE02
      Text in Illustration
      *1 Headlight Cleaner Clamp
      *2 Headlight Cleaner Hose

      Install the headlight cleaner clamp.

    5. Connect the headlight cleaner hose.

  27. INSTALL HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY RH (w/ Headlight Cleaner System)

    Tech Tips

    Use the same procedure as for the LH side.

  28. INSTALL HEADLIGHT WASHER NOZZLE SUB-ASSEMBLY LH (w/ Headlight Cleaner System)


    1. A019P5J

      Engage the 2 claws to install the headlight washer nozzle sub-assembly LH.

  29. INSTALL HEADLIGHT WASHER NOZZLE SUB-ASSEMBLY RH (w/ Headlight Cleaner System)

    Tech Tips

    Use the same procedure as for the LH side.