STOP LIGHT CONTROL RELAY INSTALLATION


  1. INSTALL STOP LIGHT CONTROL RELAY ASSEMBLY


    1. A019LNL

      Connect the connector.

    2. Engage the clamp to install the stop light control relay assembly.

  2. INSTALL INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY (for LHD)


    1. A019NDA

      Engage the claw to connect the connector as shown in the illustration.

    2. A019O4R

      Engage the 2 claws to lock the connector lock as shown in the illustration.

    3. A019NAD

      Engage the claw to connect the connector as shown in the illustration.

    4. Install the instrument panel junction block assembly with the 2 nuts.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }
    5. A019K87E01

      Connect the 4 connectors (A).

    6. Engage the 2 claws to connect the 2 connectors (B).

    7. Connect the 2 connectors.

  3. INSTALL INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY (for RHD)


    1. A019NDA

      Engage the claw to connect the connector as shown in the illustration.

    2. A019O4R

      Engage the 2 claws to lock the connector lock as shown in the illustration.

    3. A019MIT

      Engage the claw to connect the connector as shown in the illustration.

    4. Install the instrument panel junction block assembly with the bolt and nut.

      Torque:
      Bolt
      13 N*m  { 127 kgf*cm, 9 ft.*lbf }
      Nut
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }
    5. A019P1IE01

      Connect the connector (A).

    6. Engage the 2 claws to connect the 2 connectors (B) as shown in the illustration.

    7. Connect the 3 connectors.

  4. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY (for RHD)


    1. Connect each connector.

    2. Engage the claw, 4 clips and guide.

    3. Install the glove compartment door assembly with the 5 screws <F>.

  5. INSTALL DRIVER SIDE KNEE AIRBAG ASSEMBLY (for LHD)

    Click here

  6. INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY (for RHD)

    Click here