AFS ECU REMOVAL


  1. PRECAUTION

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)


    1. A019N4V

      Remove the 2 screws <D>.

    2. A019K8G

      Disengage the claw and 2 guides as shown in the illustration.

    3. Disconnect each connector.

    4. Disengage each clamp and remove the No. 1 instrument panel under cover sub-assembly.

  4. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)


    1. A019N9N

      Remove the 2 screws <D>.

    2. A019L8S

      Disengage the claw and 2 guides as shown in the illustration.

    3. Disconnect each connector.

    4. Disengage each clamp and remove the No. 1 instrument panel under cover sub-assembly.

  5. REMOVE AFS ECU (for LHD)


    1. A019K2F

      Disconnect the connector.

    2. Remove the nut.

    3. Disengage the guide and remove the AFS ECU.

  6. REMOVE AFS ECU (for RHD)


    1. A019OYC

      Disconnect the connector.

    2. Remove the nut.

    3. Disengage the guide and remove the AFS ECU.