Click here

HAZARD WARNING SWITCH INSPECTION

Click here
Click here Click here
  1. Click here

    INSPECT HAZARD WARNING SIGNAL SWITCH ASSEMBLY


    1. A019OBME02

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      4 - 1 Hazard warning switch off 10 kΩ or higher
      Hazard warning switch on Below 1 Ω
      Table 1. Text in Illustration
      *1

      Component without harness connected

      (Hazard Warning Signal Switch Assembly)

      If the result is not as specified, replace the hazard warning signal switch assembly.