STOP LIGHT SWITCH INSTALLATION


  1. INSTALL STOP LIGHT SWITCH ASSEMBLY


    1. A019MMFE01
      Text in Illustration
      *1 Lock Nut

      Temporarily install the stop light switch assembly with the stop light switch lock nut.

    2. A019OC1E01
      Text in Illustration
      *1 Cushion
      *2 Stop Light Switch Lock Nut
      *3 Stop Light Switch

      Turn the stop light switch assembly so that the clearance between the end of the threads and cushion is between <A>.

      Standard Clearance
      Area Measurement
      <A> 0.5 to 2.4 mm (0.0197 to 0.0945 in.)

    3. Tighten the stop light switch lock nut.

      Torque:
      17 N*m  { 170 kgf*cm, 12 ft.*lbf }

    4. Connect the connector.

  2. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)


    1. Engage each clamp.

    2. Connect each connector.

    3. A019OY6

      Engage the claw and 2 guides.

    4. Install the No. 1 instrument panel under cover sub- assembly with the 2 screws <D>.

  3. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)


    1. Engage each clamp.

    2. Connect each connector.

    3. A019OCA

      Engage the claw and 2 guides.

    4. Install the No. 1 instrument panel under cover sub- assembly with the 2 screws <D>.