LIGHTING SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER

    Tech Tips

    The following items can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Customize Setting / Light Control or Illuminated Entry.

    5. Select the setting by referring to the table below.

      Light Control
      Display Default Content Setting Relevant ECU
      Response Time*1 Normal Changes the delay timing of lighting the taillights when going into a tunnel when the light control switch is in the AUTO position. Long / Normal Main Body ECU (Multiplex Network Body ECU)
      Sensitivity Normal Adjusts the sensitivity of the automatic light control system.*A Light2, Light1, Normal, Dark1 or Dark2
      DRL Function On ON/OFF of the DRL function On or Off
      Disp Ex ON Sen Normal Changes the ambient brightness level required to dim the lights such as the indicator lights of the combination meter, A/C indicator light and clock.*B Light2, Light1, Normal, Dark1 or Dark2
      Disp Ex OFF Sen Normal Changes the ambient brightness level required to cancel the dimming of the lights such as the indicator lights of the combination meter, A/C indicator light and clock.*C Light2, Light1, Normal, Dark1 or Dark2
      Follow Me Home Lighting Time*2 30 s Sets up the headlight lighting time after the engine switch off. 30 s, 60 s, 90 s or 120 s
      Light up Clearance Lights at Door Unlock Function ON This function turns on the parking lights and the taillights for 15 seconds when the doors are unlocked by the smart key or the wireless key. ON or OFF

      • *1: except European Model

      • *2: for European Model

      Tech Tips

      The sensitivity adjustment may be difficult to confirm. Check by driving the customer's vehicle.

      *A
      Sensitivity of the automatic light control system A019PMI
      Setting Dark2 Dark1 Normal Light1 Light2
      *B
      Brightness level required to dim the lights A019PMI
      Setting DARK2 DARK1 NORMAL LIGHT1 LIGHT2
      *C
      Brightness level required to cancel the dimming of the lights A019PMI
      Setting DARK2 DARK1 NORMAL LIGHT1 LIGHT2
      Illuminated Entry
      Tester Display Default Content Setting Relevant ECU
      Mirr-Foot-Lgt Approached ON Lights up the door mirror foot lights when a key enters any actuation area around the doors. ON or OFF Main Body ECU (Multiplex Network Body ECU)
      Mirr-Foot-Lgt Unlocked ON Lights up door mirror foot lights when doors are unlocked using a mechanical key or door control transmitter. ON or OFF
      Mirror Foot Lighting Time 15 s Changes the lighting time of the door mirror foot lights. 7.5 s, 15 s, 30 s or 0 s
      Exterior Light Control ON Changes the door mirror foot light control. ON or OFF

    6. Customizing with the Multi-display


      1. Turn the engine switch on (IG).

      2. Enter the following menus: MENU / Setup / Vehicle / Vehicle customization / Light Settings.

      3. Select the setting by referring to the table below.

        Light Settings
        Display Default Content Setting Relevant ECU
        Headlamps-On Sensitivity 0 Adjusts the sensitivity of the automatic light control system.*A -2, -1, 0, +1 or +2 Main Body ECU (Multiplex Network Body ECU)
        Daytime Running Lights On ON/OFF of the DRL function On or Off
        Exterior Lights Off Timer 15 sec. Changes the lighting time of the door mirror foot lights. Off, 7.5 sec., 15 sec. or 30 sec.

        Tech Tips

        The sensitivity adjustment may be difficult to confirm. Check by driving the customer's vehicle.

        *A
        Sensitivity of the automatic light control system A019PMI
        Setting -2 -1 0 +1 +2

    7. Customizing using the combination meter assembly

      Tech Tips


      • Press the UP/DOWN switch on the steering pad switch assembly when changing the displayed item and item settings.

      • Press the ENTER switch on the steering pad switch assembly when selecting an item.


      1. Turn the engine switch on (IG).

      2. Press and hold the MENU switch on the steering pad switch assembly.

      3. Select the setting by referring to the table below:

        Display Default Content Setting Relevant ECU
        LIGHT SENSOR SENSITIVITY 0 Adjusts the sensitivity of the automatic light control system.*A -2, -1, 0, +1 or +2 Main Body ECU (Multiplex Network Body ECU)
        DAYTIME RUNNING LIGHTS ON ON/OFF of the DRL function ON or OFF
        EXTERIOR LIGHTS OFF TIME ADJUSTMENT 15 s Changes the lighting time of the door mirror foot lights. OFF, 7.5 s, 15 s or 30 s

        Tech Tips

        The sensitivity adjustment may be difficult to confirm. Check by driving the customer's vehicle.

        *A
        Sensitivity of the automatic light control system A019PMI
        Setting -2 -1 0 +1 +2

      4. Press the ENTER switch on the steering pad switch assembly.

      5. The setting completion screen will be displayed.

      6. Return to the item selection screen.