Click here

HEADLIGHT ASSEMBLY INSTALLATION

Click here
Click here Click here
Tip:

  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.

Click here
  1. Click here

    INSTALL HEADLIGHT ASSEMBLY


    1. Connect each connector.

    2. Engage each clamp.

    3. Install the headlight assembly with the 3 bolts and screw.

      5.4 N*m 55 kgf*cm 48 in.*lbf
  2. Click here

    INSTALL FRONT FENDER TOP REINFORCEMENT SUB-ASSEMBLY


    1. A019O73

      Engage the 3 clips and 2 guides.

    2. Install the front fender top reinforcement sub-assembly LH with the clip.

    3. A019ND4E01

      Engage the clip to the hood to cowl top seal to the front fender top reinforcement sub-assembly LH.

      Table 1. Text in Illustration
      *1 Hood to Cowl Top Seal
  3. Click here

    INSTALL FRONT BUMPER ASSEMBLY (for Standard)

    (Click here)

  4. Click here

    INSTALL FRONT BUMPER ASSEMBLY (for Sport Package)

    (Click here)

  5. Click here

    CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

  6. Click here

    ADJUST HEADLIGHT AIMING

    (Click here)

  7. Click here

    ADJUST FOG LIGHT AIMING

    (Click here)