HEADLIGHT ASSEMBLY INSTALLATION

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.


  1. INSTALL HEADLIGHT ASSEMBLY


    1. Connect each connector.

    2. Engage each clamp.

    3. Install the headlight assembly with the 3 bolts and screw.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

  2. INSTALL FRONT FENDER TOP REINFORCEMENT SUB-ASSEMBLY


    1. A019O73

      Engage the 3 clips and 2 guides.

    2. Install the front fender top reinforcement sub-assembly LH with the clip.

    3. A019ND4E01
      Text in Illustration
      *1 Hood to Cowl Top Seal

      Engage the clip to the hood to cowl top seal to the front fender top reinforcement sub-assembly LH.

  3. INSTALL FRONT BUMPER ASSEMBLY (for Standard)

    Click here

  4. INSTALL FRONT BUMPER ASSEMBLY (for Sport Package)

    Click here

  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  6. ADJUST HEADLIGHT AIMING

    Click here

  7. ADJUST FOG LIGHT AIMING

    Click here